Skip to main content
A different kind of company.
A different kind of crown molding.

Easy DIY Foam Crown Molding

so simple and easy to install

  1. 1. trim to fit
  2. 2. apply caulk
  3. 3. press into place
  4. 4. No nails, sanding, or priming 

Why our Simple DIY
Flat Back Foam
Crown Molding
Better?

We are the first and only polystyrene foam crown molding manufacturers to provide:

  • Smooth white face – no bead look

  • Flat back patent pending design

  • High-density lightweight polystyrene foam moldings

  • Minimal tools needed to install

  • MADE IN AMERICA

Simple and Easy Foam Crown Moldings are installed with a simple water based painters caulk on most surfaces and can be cut in most electric miter saws.  In addition, we offer custom corner angle cuts and pieces as well as corner blocks to transition your corners seamlessly.  Most importantly, Creative Crown also offers matching flexible molding in each profile and custom made to your specific application.

line drawing side view flat back crown molding
textured mounting surfaces

Textured Mounting Surfaces

Textured mounting surfaces improve grip making it simple to install the crown molding using only painter’s caulk. No nails needed.
flat back crown molding

Flat Back

The flat back takes the guessing out of crown molding placement. No measuring, no pencil marks, no chalk lines.
light weight crown molding

Light Weight Polystyrene

The light weight of the polystyrene makes it possible to install the crown molding using only water-based painter’s caulk. No nails, no finding and marking studs. Just press into place and you are done. One person can do it.
smooth finish for easy painting

Smooth, Flat Finish

The high density of our polystyrene foam creates a very smooth, even surface that only requires a single coat of water-based paint. No priming needed.
LED lighting addition

LED Lighting Ready

The design of our crown molding makes it easy to install LED strip lights for a dramatic or cozy recessed lighting effect.
room for wiring and cabling

Easily Run Wiring

Our flat back crown molding provides plenty of space to run wires and cables during installation.

Our customers love us and our Simple and Easy Foam Crown Molding

Bill Morris
March 21, 2024.
Customer service at Creative Crown is outstanding! My installer inadvertently put dents and scratches on the crown during installation. I contacted Brett at Creative Crown and he provided a solution. Can't say enough about how much we love the crown and the outstanding customer service that Brett provided! (PS Tell your installer to trim his/her fingernails before installing the crown!)
J Z
March 14, 2024.
I bought a 4.5” crown moulding for my bedroom and had a contractor install it. This time I renovated a guest bedroom and ordered it with 4 inside cuts and one outside cut. It was SUPER easy and came out BEAUTIFUL ! So happy with the results! What’s amazing is that nobody believes me when I tell them that it’s not wood
Michael Johnson
March 13, 2024.
Great product, customer service, and communication. Definitely will be a repeat customer.
Darrell Carver
March 8, 2024.
We did a small entry way and was so satisficed with the ease of installation that we decided to do a larger bedroom with crown molding. Very easy to install and looks great. Of course, the secret is to measure, measure, and measure before you cut!
Tracie Sampson
March 6, 2024.
Great company and product. The crown molding was easy to work and looks fantastic.
James Koch
February 29, 2024.
Bought (postage only - samples were free) the samples as I was a bit leery of the product. The samples gave me a good feel for the product. Light, easy to handle. I wish they had been five to six inches long instead of the three, but we now know what we want for our bedroom. The builder put up popcorn ceilings to hide bad corner seams. I stripped the coating and repaired the flat surfaces but we decided to hide the bad work rather than tape it new. The builder used acrylic caulk in the ceiling corner joints so a repair would have been time consuming. CC's product looks to be what I need. Once I get two more rooms stripped of that junk on the ceiling, I will be ordering enough for all bedrooms and the hall. Update - 28 Feb 24....The project is finally complete, and my wife is completely satisfied with the result (hey - after 52 years of marriage, that is a measure of success) I'm 72, so putting up crown molding is not something one would normally do alone, but this product is easy to handle alone. As long as your miter saw is dead on, all of the cuts meshed well (I learned that on the first inside angle of 21 degrees - not the expected 22.5) Used butt joints on the long runs, not scarf joints and you cannot see the seam unless you look hard for it. Spackle sealed the joint and could be sanded smooth, and it didn't crack. The painter's caulk served to both secure the molding to the wall and ceiling and to caulk the joint. Because the product is light I had my wife hold the longer pieces steady while applying caulk, but other than that it was a one man job, and, frankly, you cannot tell that it is not wood. I cannot say enough good about the end results. Follow the instructions on their videos and it comes out great. I used two coats of paint (one initially and a second when it was up to cover the joints). Thanks Creative Crown!
Johnny Moreno
February 7, 2024.
Great product and fast delivery!
Nissar Hussain
January 20, 2024.
I reached out for information and got a response a few minutes later even during a holiday. Samples I ordered were easy to cut flush and looked great.
James Baker
January 19, 2024.
Look so far so good. Fast delivery. Was jyst samples
Abel Mireles
January 6, 2024.

Instructional Videos

Need a little help?

We have videos that show you:
  • Crown Molding Installation

  • How to cut crown molding

  • How to cut inside and outside corners
  • How to make good seams
  • How to paint crown molding

  • Install indirect LED lighting with crown molding

  • And more!

Not Sure yet?

Have questions? Need guidance?
Give us a call, text or email us a picture or diagram of your room and we would be happy to discuss options.

Free Samples!

Select up to 5 styles of flat back crown molding
  • Samples pieces are 3-5 inches long each.
  • Just pay $12.50 for shipping.

Don't leave!

Enter your details below and save your cart for later! We have promotions from time to time that you can take advantage of in the future. We also have 2nds material that is offered at a HEAVY discount when supplies are available! Call us today!